Migrating from schema stitching
How to move your services to Apollo Federation
If you have a distributed graph that uses schema stitching, follow the steps in this guide to migrate it to use Apollo Federation.
For a real-world example of an organization benefiting from this migration, see this blog post .
Summary of steps
This guide describes a set of steps for migrating architecture incrementally from stitching to federation. In order to do so, we rely on the fact that changes necessary for federation are completely backwards compatible. In other words, services that implement a part of your graph (subgraphs) can be used in both your stitching gateway and your Apollo gateway.
We recommend that you begin by modifying existing subgraphs in place to support the federation specification while continuing to support schema stitching as well. At this point, you can stand up an Apollo gateway side-by-side with your existing stitching gateway and migrate over the links between the subgraphs in an incremental, backward compatible way.
Here are the high-level steps for migrating to Apollo Federation:
Add federation support to your subgraphs.
Register your GraphQL schemas with a registry.
Start up an instance of Apollo Server as a gateway.
Migrate stitching logic from your schema-stitching gateway to your subgraphs.
Move traffic from the schema-stitching gateway to the Apollo Server gateway.
Remove schema-stitching fields from your federated schema and complete your migration.
Each step is described in detail below.
This GitHub repository shows the same project before and after migrating to Apollo Federation from schema stitching.
Step 1: Add federation support to your subgraphs
You can add federation support to your subgraphs without impacting your existing schema-stitching architecture. Support for federation is fully compatible with schema stitching.
Because of this, we recommend that you migrate your subgraphs in-place instead of creating replacement subgraphs. Doing so helps you identify any type conflicts that exist across your graph.
Using Apollo Server
If your subgraphs use Apollo Server, add federation support to them by installing the @apollo/subgraph
package:
1npm install @apollo/subgraph
Then use the buildSubgraphSchema
function to augment your schema with fields that are necessary for federation support:
1const { ApolloServer } = require('apollo-server');
2const { buildSubgraphSchema } = require('@apollo/subgraph');
3
4const server = new ApolloServer({
5 schema: buildSubgraphSchema([
6 {
7 typeDefs,
8 resolvers,
9 },
10 ]),
11});
Using a GraphQL server besides Apollo Server
There are several community-contributed packages that add federation support to other GraphQL runtimes.
Step 2: Register your schemas with a GraphQL registry
We strongly recommend that you register all of your GraphQL schemas with an external registry . This registry supports running the gateway with the subgraphs' partial schemas. Additionally, it enables tracking changes at the subgraph level and protecting the graph from changes that break composition.
Apollo Studio provides a free schema registry that helps you manage your federated gateway's configuration. You provide your gateway a Studio API key on startup, which directs the gateway to download your schemas automatically in a fault-tolerant way.
Studio can also provide schema validation to ensure that all changes you make to your subgraphs are compatible with your complete graph.
Step 3: Start up an Apollo Server gateway
After you've registered your schemas, you can start exposing your subgraphs from a federation-compatible gateway. Apollo Server's gateway is a query planner and executor that handles incoming GraphQL requests and breaks them down into a collection of operations to perform on your subgraphs.
We recommend setting up the Apollo Server gateway alongside your existing schema-stitching gateway. Depending on your infrastructure, you might even want to run both in the same process to support dynamically routing traffic through one gateway or the other.
To enable managed configuration with Apollo Studio, set the APOLLO_KEY
and APOLLO_GRAPH_REF
environment variables when you start up your Apollo Server gateway, and do not provide the supergraphSDL
or serviceList
constructor option to ApolloGateway
. For details, see the Apollo Studio documentation .
After your gateway is set up, you can make direct queries to it that are routed to the correct subgraphs.
Step 4: Move linking logic to your subgraphs
When using a schema-stitching gateway, your linking logic typically resides in the gateway itself. In the federation model, however, linking logic resides in each subgraph. Therefore, you need to migrate linking logic from your schema-stitching gateway into each of your subgraphs.
Here are recommendations for common cases when migrating your logic:
Fragments: Fragments in a schema-stitching resolver, usually translate to a combination of
@key
and@requires
directives in a federated model. In general, think of@key
as the field(s) that completely identify an entity, and only use@requires
for additional, non-identifying information.Filtering types: We do not recommend filtering types out of your exposed schema when using a gateway. If you want to hide types, do not include them in your subgraph's registered schema.
Renaming types: If you are currently renaming types at the gateway level, rename these types at the subgraph level instead.
Transforming fields: If you are currently transforming fields at the gateway level, transform these fields at the subgraph level instead.
Adding resolvers to your subgraphs
At this point your subgraphs support federation, but they still need to be able to resolve extensions to types that are defined in other subgraphs.
A schema-stitching architecture declares this logic at the gateway level using the delegateToSchema
function, like so:
1resolvers: {
2 Reservation: {
3 user: {
4 fragment: `... on Reservation { userId }`,
5 resolve: (parent, args, context, info) => {
6 return info.mergeInfo.delegateToSchema({
7 schema: userSchema,
8 operation: 'query',
9 fieldName: 'user',
10 args: {
11 id: parent.userId,
12 },
13 context,
14 info,
15 });
16 },
17 },
18 },
19}
This resolver calls Query.user
on the userSchema
to look up a User
. It adds that user to the Reservation.user
field that was previously defined at the gateway. This code can all remain. You don't need to remove it from the stitched gateway. In fact, if you did that, the stitched gateway would break.
On the other hand, a federated architecture defines its resolvers at the subgraph level. These resolvers rely on entities, which are identified by a primary key. For example, the Reservation subgraph must define the Reservation
type as an entity to allow other subgraphs to extend it. These other subgraphs use the Reservation
's @key
fields to uniquely identify a given instance:
1type Reservation @key(fields: "id") {
2 id: ID!
3 ...
4}
In the Users subgraph, you can then extend the Reservation
type with a user
field like so:
1extend type Reservation @key(fields: "id") {
2 id: ID! @external
3 userId: ID! @external
4 user: User @requires(fields: "userId")
5}
The user
field indicates that it @requires
a Reservation
's userId
field in order to identify the user that made the reservation.
Then in the Users subgraph, you can add a resolver for Reservation.user
like so:
1{
2 Reservation: {
3 user: ({ userId }) => {
4 return lookupUser(userId);
5 },
6 }
7}
Federated resolvers like this one always receive an object that represents an instance of the extended entity. This object includes the fields that are part of the entity's @key
, along with any other fields that the resolver @requires
.
For example, this Reservation.user
resolver receives the id
of the reservation and a userId
. You can use the userId
to look up the corresponding user.
Step 5: Move traffic from the schema-stitching gateway to the Apollo Server gateway
At this point, both your schema-stitching gateway and your federated gateway are able to resolve GraphQL operations. You can now begin moving traffic from the schema-stitching gateway to the federated gateway.
Perform this migration in the manner that best suits your infrastructure and applications.
Some options include:
Testing a complete migration in your staging environment to verify that both gateways behave identically
Use HTTP headers or feature flags to migrate your internal clients without affecting your user-facing clients
Step 6: Remove schema-stitching fields from your federated schema
After you've fully migrated your graph and incoming traffic to use your federated gateway, you can remove all stitching-specific logic from your architecture.
You can now begin to modify your existing schema to take full advantage of the features that federation provides. These features include:
Greater flexibility with federation core concepts
Validation of composition logic and usage traffic (with a paid plan)